206 Royalty-Free Audio Tracks for "Low Pitch"

Several hits on a wok pan lid produced these low pitched metallic rings that were interesting to me. I used a soft foam insulation piece to hit the lid and recorded it with a zoom h5.

Another poot with a sweeping pitch from low to high. Processed with audacity for a more consistent tone and volume.

It is a constant sound of air expelled of the machine in the form of cold air streama and it has low pitch.

A subbass sine wave with a slow throb volume envelope and some panning action, designed to work well as a loop or a sample. Created with ableton and audacity.

A broken electric organ playing a bass note (d-flat). More of a "here if you want it" type thing.

My scanner scanning a page, plus one note on the piano of almost the same pitch. Low whine.

Utilizing ableton vinyl distortion as a sound source to produce this experimental texture. Also a ride cymbal pitched and stretched as the source for low frequency ambience.

A re-mix of this sound::. Https://freesound. Org/s/440700/. Pitched it down a bit, ran it through a bpf on a low sweeping rate, then through a phaser with a low rate, then a flange, then compressed the daylights out of it. Yeehaw.

Microwave buttons pushed 4 times and cycle starting. Cycle is a low hum. Higher pitch, clear, consistent. Recorded on zoom h4, indoors.

I made this completely with my voice but low pitched, use for anything you want along with any of my other sounds, just credit me.

A cheesy laser gun sound. Generated using ableton live's operator using a pitch envelope and a variety of filtering and lfos.

You can hear a basquet with a crumpled paper in a paper rubbish inside the building of tallers. Short sound and low pitch.

Synthesized sawtooth sound with increasing pitch. An initial click and noise are added. The sound is low-pass filtered using a cutoff frequency that increase during the sound.

A very low-pitch xylophone from the lmms daw, with reverb, initially i was attempting to emulate footsteps, but it turned out to be somewhat sinister and eerie instead.

Sorry, if this music weren't made by me. This is "sonic. Exe - green hill zone" i guess. . . But i made it low pitched because yes. So, please don't flag this song. It's just mr incredible becoming uncanny phase 15 full music. You can use it if you wanna to. You can credit me for low pitched sonic. Exe green hill zone song. You can enjoy this music i guess. So, should i make mr incredible becoming canny phase 16 and 17 music?tell me in the comments. I hope this music is not cringe or something like that. And i hope there is nothing wrong with this music.

This is a recording of me screaming. I made this sound by lowering the pitch of my scream, slowed it down, added reverb, made it 7 or 8 times louder, added a robotic effect, gave it a high and low pitch using kinemaster. Usfull for horror games :).

A quote from macbeth using my blue snowball microphone. Lowered the pitch of my voice slightly, added some re-verb and a low tone for effect.

This sound is a low pitched sound, and a very rumbly type of sound too. The laundry machine also gives out a fast pace moving sound, kind of like a rotating drum sound.

Doorbell sfx, could be low-pitched for a better sound maybe. Recorded on my pc, edited with lmms and audacity.

Three high quality foley sounds of a low pitched echoing drum for suspense. For those who have played the game slender man, they just might ring a bell. These were made by using a sample of a drum and adding heavy low pass and adobe soundbooth's echo and dream sequence effect.

A single hit of a 7 x 14" dw edge snare drum. Recorded with a beyerdynamic m201 mic. Sounds even better if you pitch shift it lower!.

Sounds recorded for a personal project. I recorded myself doing different kinds of low, soft surprise sounds and shifted the pitch to a more female voice range.

Drop of water dripped from faucet onto kitchen sink with added reverb and lowered pitch.

Low-pitched. Mono. Dry. Ascending chromatic scale played on the theremin. Saw-tooth, buzzy, giant robot steps. Recorded dry so you can add the effects you wish.

Low-pitched. Mono. Dry. Descending chromatic scale played on the theremin. Saw-tooth, buzzy, giant robot steps. Recorded dry so you can add the effects you wish.

This is a slow, low pitched, boom that has been reversed and reverb effect has been added to it. Perfect for a eerie atmosphere! created using fl studio 10, using their kick sound. This is my first sound. Enjoy.

Recycled guitar from rubbish tip site- pitch shifted down- intended as raw material for creating atmospheres, sound effects or new samples etc.

Made in fl studio, recorded and processed in audacity. Recorded 6:44 pm 8/03/2020.

A short clip of a wooden door opening, first a high pitch creak, then a low pitch as it's movement slows. Recorded at close proximity with a sennheiser 416 microphone, to a sound devices 552, in a residential, fully attached house, with minimal noise and background but natural ambience and reflection, from a large (bed)room.

I first generated a sinusoid at 440 hz with audacity, i then changed the pitch to f#/gb low and i applied a tremolo effect wetness 40% and a frequency of 4. 0 hz. We can also ear crossfades in and out.

Recordings of variouts trumpet extended techniques, performed by david bithell, recorded by ali momeni with a neumann mics (marked. L) and an earthwords (marked. R). Dynamics are indicated with from pp (very soft) to ff (very loud). V indecas valve, s and l indicate short and long, pitches in names indicate fingered pitches,.

Squeaky audio cable-to-speaker incomplete connection. One end is plugged into a speaker and the other is not plugged into anything. The squeaking sound is made from my fingers touching the tip and sides of the metal tip of the non-connected end of the cable. The variation of sound and pitch is from moving my fingers up and down the metal tip in different speeds, angles, and placements. The sound has been slowed way down, and the pitch has been taken way down too, to create a low drone sound for industrial purposes or in mad chemistry lab scenes, etc. Anything with a dark, industrial, and slight sci-fi feels.

Swelling ambient sound. Could be used for ambient sounds in an industrial setting. Source sounds:washing machine pitch shifted by 6 semi tones then slightly stretchedeq applied accenting low endreverbcompression with a ghost snare side chained to it to create the swell. Enjoy.

This is a sine-wave that sweeps from low to high. Cassette emulator is added and some reverb. A long high pitched tail is at the end, which i forgot to remove. Inspired by the film "wavelength" by michael snow.

2 lengths of 3 different pitches of this low cinematic squelch bass. Played once with a large reverb and again played dry with no fx. This sound is modeled after the inception movie's large horn blast. It is a low multi-voiced saw wave with a specific ring modulation setting to give it it's effect. This sound is rendered as a 44100 sample rate 16 bit wav file. Made with native instrument's massive inside ableton live 9.

Hi! this is my first upload. This is a recording on a bbb tuba of an a natural (below staff), a low b natural (also below), and an f natural (below again). Edited for ominous-ness with expstudio audioeditor and cyberlink waveeditor. Mostly an experiment in those suites. Sorry for low quality/wrong pitches!.

A sort of low-pitch breathing-like sound of some big thing lurking in the deep, useful for background ambient on some kind of scary place. All components of this were made from mixing various effects together in fl studio.

A deep and dark track i made using mainly just my voice screaming into the mic, all i did was low pitch it and add a few other sounds. Use in anything you want i just want credit.

Low raspy male groans with a few higher pitched screeches/crackles near the end. Some breathy portions are in here as well. Zoom h4n.

This is a fragment from the aria ah mes amis at a lower pitch and badly performed. Iintend to use it for a coursera homework (audio signal processing for music applications). The intention is to transpose it and simulate a morfing like a falseto to the true key where the tenor hits high c, which i obviously cannot hit, otherwise i wouldn't be taking coursera courses and uploading to freesound. . .

This sound was created in audition by using three sample tracks with altered pitches for the sound of the timer countdown. I used an altered 8 bit sample for the explosion, bringing out the low range and lowering the high range with a 30 band compressor.

I created this sound effect using chiptone. You don't need to credit me. You can support me by donating to my ko-fi page here: https://ko-fi. Com/staycalm182.

Coffee maker recorded with zoom h4n pro on tripod. Low-pass filter applied to remove some high pitch snaps. Roughly first 40 seconds reconstructed from clips to extend sound of water gurgling. Recorded for use as a sound effect for a play.

Very low pitched and subtle rumbling. Protoplasm vst custom settings, applied effects delay, chorus, eq,rendered in fl studio @ 140bpmthe letter and number in the file name represent the note location of the sound.

Layered synthesis of the sound of a big hit. 1 layer. Recorded sound of a blow to the pillow (take with a percussion tint)2 layer. Recorded sound of a blow to the pillow (double low kick)3 layer. Recorded sound of a blow to the pillow (variation of a low-kick double with a low pitch and a different attack phase)4 layer. The sound of a low-frequency sweep, like in a synthetic bass drum, obtained on a synthesizer. )an additional layer of metal impact (recorded by me) is not present in all variations of the sound presented. Each layer was subjected to quite extreme compression and equalization. A bit of overdrive is present. Well, convolutional reverb.

A natural poot (fart) with a more or less linear shift from higher to lower pitch. Processed with audacity for a more consistent tone and volume.

This is one of my favorite sounds to open my live sets with and is featured in my track water's bomb, as well as in the intro to the digital juggernauts album, "giant killer robots. " to make it, you use a sample of a plane flying over, i used a 707, and a djm-500's pitch shifter fx. As the sample gets longer, turn the pitch to the high end, then to the low end. Hope you all love and use this sound!.

Electric wood sander sanding a sheet of ply wood. Hard, loud and abrasive sound, high volume low pitch. Recorded inside a workshop with a zoom h6 recorder. Audio was post-processed to boost the audio. Wood sander was a bosch 230v.

A semi-automatic rifle, pitched down 3 semi-tones. Made in bitwig, i used 10 different recorded gunshot layers that have been eq'ed and multiband compressed to form a new gun sound. Subbass was synthesized for the super low end. The process i use is to select frequencies using high pass and lowpass filters from a recording for the lows, mids and highs. This forms a "layered sound".

Digital manipulation of a sampled bass synth with pitch lfo. Sampling, multiband processing middle frequencies, saturation of low frequencing, filtering and compressing.